The American Stairways Husky 655 Series is made from selected kiln-dried southern pine lumber. The full width piano hinge and 3/16" ladder rods supporting each tread provide added strength and stability. Comes completely assembled with predrilled installation holes.
Included Features:
- Pre-drilled Installation Holes
- Full Width Heavy Duty Piano Hinge - Reaches across the entire width of stairway. For added strength and rigidity, cuts out air leakage, and does not interfere with trim carpenter.
- Easy First Step Out of Attic
- Steel Ladder Rod Under Each Tread - 3/16" Ladder rod with large washers to keep HUSKY stairs rigid and prevent bending or separation under heavier loads.
- Selected Kiln Dried Southern Pine Lumber - All wood parts selected for density and load bearing capability.
- Re-inforced Door Panel - Spacer and Runner Construction on Door to Prevent Warpage.
- Moulded Stringers, Handrail, and Treads - Eased edges practically eliminate splinters & enhance finished millwork appearance.
- Safety Locknut to Secure Spring Arm to Ladder Section.
- Adjustable Spring Tension.
- Nuts, Bolts, and Hardware Plated to Prevent Rust, no welded hardware.
- Completely Assembled, ready to install with instructions supplied.
- For Residential Use Only.
Optional Features:
- 3/8" Thick Birch Panel Door (included on all 30" and 10' 8" models)
- Fire Resistant Door & Well Sides - Class A - Flame spread not over 25" in 30 minutes by UL Weather Stripping
- Double Section Ladder Hinges - Increases weight capacity to 350 lbs. (included on all 30" x 60" models with max heights of 9'3" and 10'8")
