Quiet Glide 20"W Non-Rolling Library Ladder with Non-Skid Feet (with Ladder) Kit - Oil Rubbed Bronze Finish

We are excited to bring a practical new addition to our Library Ladder collection! We heard from many customers who wanted a movable library ladder that does not roll, so we designed the single adjustable and the double ladder hooks, as well as rubber non-skid feet. This new hardware allows you to have the movable (but non-rolling) ladder that's perfect for your unique needs! The Single Adjustable Hook has one hook on the top. The hook is adjustable for easy storage. The Double Hook Kit is a cost-effective alternative to the Single Adjustable Hook Kit. The top hook is for when the ladder is in use, and the bottom hook is for stow-away. View More

In stock

Product Code

QG_20W_Ladder_Kit_Oil_Rubbed_Bronze_Non-Rolling

Be the first to review this product

From $765.25

To $3,582.48

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Customize Quiet Glide 20"W Non-Rolling Library Ladder with Non-Skid Feet (with Ladder) Kit - Oil Rubbed Bronze Finish

Hardware Style

Choose your hardware style:

[1] The Single Adjustable Hook has one hook on the top. The hook slides for easy storage.

[2] The Double Hook Kit is a cost-effective alternative to the Single Adjustable Hook Kit. The top hook is for when the ladder is in use, and the bottom hook is for stow-away.

Quantity

+ -

Choose Rail Height Range

Select the rail height range for your ladder:

Measure the height from the floor to where the center of the rail will be installed and choose your ladder height range from the following:

Rail height up to 91"
Rail height from 92" to 103"
Rail height from 104" to to 115"

Quantity

+ -

Choose Ladder Wood Species

Select the wood species for your ladder:

Choose the wood species for your ladder below. Ladders are shipped unfinished and ready to be stained or painted.

Quantity

+ -

Add Abrasive Tread Covers?

Add abrasive covers to ladder steps?

For increased safety, you can add clear abrasive covers to your ladder steps. Tread covers are sold per cover, and one tread cover is needed for each rung of the ladder:

8' Ladders have 7 Rungs
9' Ladders have 8 Rungs
10' Ladders have 9 Rungs

Quantity

+ -

Add a Handrail?

Add handrails?

Add a pair of steam bent solid wood handrails to your kit in one of the wood species below.

Quantity

+ -

Add Ladder Rung Supports?

Add extra support rods?

Additional support rods are required for ladders over 8'. Please add one additional support rod for a 9' ladder, or two additional support rods for a 10' ladder.

Quantity

+ -

Add 4' Straight Rail Sections?

Choose the number of 4' straight rails for your installation. Rail sections can be joined together using splice kits and additional rail sections to create longer length rails for your installation. Rails can also be field cut to size for exact fit.

Quantity

+ -

Add 6' Straight Rail Sections?

Choose the number of 6' straight rails for your installation. Rail sections can be joined together using splice kits and additional rail sections to create longer length rails for your installation. Rails can also be field cut to size for exact fit.

Quantity

+ -

Add 8' Straight Rail Sections?

Choose the number of 8' straight rails for your installation. Rail sections can be joined together using splice kits and additional rail sections to create longer length rails for your installation. Rails can also be field cut to size for exact fit.

Quantity

+ -

Choose Rail Bracket Type & Quantity

Choose your bracket style:

Choose vertical - or - horizontal style wall mount rail support brackets, or ceiling mount brackets
For more info about ceiling mount brackets, click here.

The recommended spacing between each support is 32", or 4 brackets for the first 8' of straight rail, and 3 brackets for each additional 8' of straight rail. Each curved track should get 2 rail brackets.

To calculate a recommended number of brackets for your straight runs of rail, follow these steps:

1. Total up the number of feet of straight rail for each run of rail
2. Convert the total number of feet of straight rail to inches. (For instance 10' = 120")
3. Divide the number of inches by 32, and round fractional amounts up. (For example 120 / 32 = 3.75, round up to 4)
4. Add 1 to the previous number to get your total number of brackets. For 10' of straight rail, your total number of brackets should be 5.
5. Finally, add 2 brackets for each curved rail section

Quantity

+ -

Choose End Stop Style for Rail Ends

Choose your end stop style:

End stops terminate and finish the ends of your railing. Choose standard style - or - ball style end stops for your rail installation. End stops are sold in pairs. (2 each per qty)

Quantity

+ -

Select Number of Rail Splice Kits Needed

Add rail splice kits?

Rail splice kits are used to join two sections of rail together to create a longer rail. Typical installations will use a total of (1) less number of splice kits than the total number of individual rail sections for your project. For instance, if you are creating a run of rail that is 20' using (2x) 8' rails, and (1x) 4' rail (3 total individual sections of rail), you would use (2) splice kits to join them together.

Quantity

+ -

* Required Fields

Track Mounting Height

Enter in the exact measured rail height rounded up to the nearest inch. This is the height measured from the finished floor to where the center of the rail will be installed. Your library ladder will be custom built to this rail height, with the ladder itself projecting approximately 5" above this rail height. For example, if your rail height is 91", the ladder itself will be approximately 96" tall.

Enter In Your Track Mounting Height (To the nearest inch)

Your Customization

Quiet Glide Rolling 20"W Non-Rolling Library Ladder with Non-Skid Feet (with Ladder) Kit - Oil Rubbed Bronze Finish

Quiet Glide 20"W Non-Rolling Library Ladder with Non-Skid Feet (with Ladder) Kit - Oil Rubbed Bronze Finish

In stock

$765.25

Summary

Description

Oil Rubbed Bronze Finish Non-Rolling 20"W Library Ladder Kit

Buy our kit with a ladder!

We are excited to bring a practical new addition to our Quiet Glide Library Ladder collection! We heard from many customers who wanted a movable library ladder that does not roll, so we designed the single adjustable and the double ladder hooks, as well as rubber non-skid feet. This new hardware allows you to have the movable (but non-rolling) ladder that's perfect for your unique needs!

The Single Adjustable Hook has one hook on the top. The hook is adjustable for easy storage.

The Double Hook Kit is a cost-effective alternative to the Single Adjustable Hook Kit. The top hook is for when the ladder is in use, and the bottom hook is for stow-away.

We can build to your custom height up to a 10’ ladder (115" rail height). Just measure from the floor to where you want the center of the rail, and we'll build the custom ladder for you!

Fixture Style for This Library Ladder Kit:

Choose between Single and Double Hook Kit

Features:

Oil Rubbed Bronze Finish
All parts are powder coated
Ladder stores against wall out of the way when not in use
Easy to move, Non marring feet
Rail heights up to 115" (up to 10’ Ladder)
Some assembly required
Allow 3-4 weeks for your custom ladder to be built

The Non-Rolling Ladder Kit Contains:

Two Top guides (Choose Single or Double Hook)
Unfinished, Paintable/Stainable Wood Ladder
Installation Hardware Included
Installation instructions
Two Non-Skid Feet

Specifications

More Information
Weight(LBS)	0.000000

Product Questions

See all

No questions yet. Be the first to ask the question!

Documents

Ratings & Reviews

Write Your Own Review