The Oak Straight Stair Kit’s open riser design lends a light airy appearance that complements any setting. The Kit can be assembled easily in just a few hours and includes: oak stringers & treads, all necessary hardware, top header plate & nosing, bottom securing clips, and oak cover plates. Available in your choice of a 36"W (31-7/8" clear tread width) or 40-1/8"W (36" clear tread width) stair.
The Oak Straight Stair Kit Features:
- Extra sturdy construction, oak stringers are 10" high x 2" thick, oak treads are 101/2" deep overall x 2" thick.
- Choice of 36" overall finished width or 40-1/8" overall finished width, at the same price.
- All oak components furnished in a mill finish ready for staining or clear coating.
- 1-3/4"W x 2-1/4"H Handrail
- One 1-1/4" x 1-1/4" square spindle per riser
The handrail is an optional kit comprised of an oak handrail, one oak spindle for each riser, and all fasteners. Two handrail kits are needed if the stairway will be open on both sides.
Please Note: The Oak Straight Stair Kit is custom cut to fit your installation. Before ordering, please check your local building code requirements and determine your finished floor-to-floor height.
Optional Spindle Upgrades:
| Upgrade the style of each spindle from a standard 1-1/4" x 1-1/4" square spindle to one of the following: |
Colonial Spindle |
Traditional Spindle |
European Spindle |
|
|
|
Add an intermediate spindle:Recommended for homes with small children, pets, or to meet code requirements, this option will add an intermdiate spindle to each tread to reduce the spacing between the spindles.
