You are here: Home > Railing Systems > Feeney CableRail
Feeney CableRail

Feeney CableRail Standard Assemblies Make Measuring, Ordering and Installing a Breeze.

Standard Cable Assemblies are sold in a wide range of standardized pre-cut lengths for easy ordering. There is no wasted time taking precise railing measurements; just select assemblies that are longer than you need and trim any excess in the field. Each assembly includes special Threaded Terminal and automatic-locking Quick-Connect®SS attachment fittings that are sleek, simple to use, and easy to conceal. The result is not only extremely durable and aesthetic but virtually invisible, allowing beautiful, unimpaired views.

  • Made from high-strength, low-maintenance, weather-tough, 316-grade stainless steel
  • Available in 1/8", 3/16", and 1/4" diameter cable to complement any railing design
  • Sold in a wide range of standard lengths (5 ft to 70 ft in 5-ft increments) that can be trimmed to a finished dimension in the field
  • Patented automatic-locking Quick-Connect®SS fittings make installation fast and easy
  • May be installed on new or existing wood or metal railing frames in exterior, interior, residential, and commercial settings
  • An ideal choice for fences and trellises
  • Please note that Feeney CableRail standard assemblies should never be used for lifting, hanging or other high-load applications
  • Complete installation instructions, frame requirements, 3-part specifications, and detail drawings available
  • Product contains recycled materials
O R D E R I N G
Cable Assemblies for Metal Frames
(4-1/4" long Threaded Terminal)
Cable Assemblies for Wood Frames
(7-1/2" long Threaded Terminal)

Select a Diameter:

Select a Diameter:

Included in each standard assembly
The selected length of 1/8", 3/16", or 1/4" diameter type 316 stainless steel cable with one pre-attached Threaded Terminal fitting, one Quick-Connect® SS fitting, two stainless steel Flat Washers (or two nylon Flat Washers for metal posts), and one stainless steel Snug-Grip® washer nut. Colored or Stainless Steel End Caps are optional.

CableRail Parts CableRail Parts

CableRail Tools CableRail Tools

Frame Checklist and Important Notes

  • Carefully plan the location of all end and corner posts to allow for proper clearance from walls and to maximize cable run lengths.
  • To ensure proper tensioning, straight runs of cable (no turns, dips or rises) should not exceed an 70 ft assembly.
  • Cable runs that do have corner bends or dips should not exceed a 40 ft assembly and should not have more than 2 corners or bends per run.
  • End and corner posts (the cable load bearing posts) must be of the recommended minimum sizes noted in the frame requirements & details pages.
  • All posts/verticals should be spaced a maximum of 3 feet apart.
  • Cables should be spaced a maximum of 3 inches apart.
  • All posts must be securely fastened to the cap rails and to the deck joists/structure.

  View Assembly Instructions

  View Metal Frame Requirements

  View Wood Frame Requirements