Home > Library Ladders > Wood Rolling Library Ladders >

  Cotterman Wood Rolling Library Ladder - Track Height: 9'6" to 10'6"
Cotterman Wood Rolling Library Ladder  - Track Height: 9'6" to 10'6"

Alternate View:

List Price: $834.20
Our Price: $750.78

Availability:: Usually Ships in 2 to 3 Weeks
Product Code: WLT-2P

Mounting Bracket Style*:

Track Mounting Height*:

Wood Finish:

Number of Track Sections*:

Add Curved Track Section (inside curve) [Add $90.00]

Add Black Steel Side Mounted Handrails [Add $76.50]

Add Abrasive Cover to Steps [Add $27.00]


Oak Library Ladder
The Cotterman #1 Straight Side Oak Track Ladder has been in use since the 1920ís. In this time Oak Track Ladders have adapted to many applications, the most common being bookstores, libraries, and shelving access for retail stores. The furniture grade quality appearance adds to the appeal of the ladder, especially in home libraries and retail floor environments. .


  • Large reinforced nylon wheels for smooth, quiet operation
  • Best braking system in the industry, Weight actuated and adjustable.
  • Steel tie rods for extra support
  • Chip resistant, black oxide track
  • Crescent-shaped casting allows ladder to be easily swung against wall when not in use
This Oak Library Ladder is shipped ready for installation - no cutting or drilling of the ladder required!
  • Oak track ladder
  • 10' Track Sections (can be cut down to size)
  • End brackets
  • Center brackets
  • Mounting and rolling hardware (Black finish only)
Wood and Finishes:
The ladder is constructed of the finest red oak available for strength, durability, and beauty. All ladders are available with either two coats of natural, clear poly finish, unfinished and ready to be stained, or optional factory walnut stain.

Other optional wood species are available. Contact us for a quote!

Dimension and Installation Characteristics:
  • 300 lb Capacity
  • Swings in at the bottom when not in use to occupy less than 9" of aisle space
  • Overall width of ladder is 16", approximately 28" across bottom wheels
  • Angle with floor is 80ļ
  • Ladders project above the top of track 4"
  • The track is normally placed in line with a shelf no more than 3 feet below the top of the highest merchandise to be reached
  • One ladder is recommended to every 20 or 30 feet of track.
  • The horizontal distance from the lace of the protruding merchandise to the center line of track should be more than 1 1/2" to clear the upper fixtures.
  • Brackets should never be installed by screwing directly into the front edge of plywood uprights or shelves because the fastening strength may in insufficient.

Mounting Brackets

Please select the mounting bracket type and track height in inches - no fractions of an inch. The ladder will be custom made to your specifications, so please be accurate. All sales are final. This product is non-returnable.

L10: For fastening on top or under side of shelving, generally with pan head screws.
L11: Similiar to L10, but allows up to 2 1/2" of additional space between track and face of shelving.
L11-T:For mounting on the vertical side of an upright, allows 4-3/4" space between track and face of shelving.
L15: For mounting on front edge of upright.
L17: Same as L15 but provides 1 5/8" additional space between track and face of shelving.
L56: For mounting on front edge of shelf where other brackets cannot be used. Compatible with L15 brackets, can be used as intermediate to L15 where uprights are spaced greater than 4 feet. Made in 2 parts for convenience in mounting. L56 Brackets are 3-1/2"L x 3/4"H.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Library Ladders > Wood Rolling Library Ladders